Pre-Ride Inspection

Air Filter

Inspect air filter, ensure it is properly installed; ensure air box cover is secured and fastened. Replace the air filter if it is dirty or wet. Note: Air filter removal is not needed for visual inspection.

Steering System

Check for tightness/freeplay in the steering wheel when turned lock to lock

Front / Rear Suspension

Visually inspect for damages to the control arms / trailing arms / bushings; check for leaking shocks

Tires

Check for proper air pressure in all tires; visually inspect for damage; verify there is adequate tread depth

Wheels / Lug Nuts

Ensure rim is not cracked or bent; verify proper lug torque

Headlights / Taillights

Ensure all lights are operational; adjust headlight aim, as needed

Brake System

Check brake fluid level is between MIN and MAX; ensure brake pedal is not soft when pushed; inspect for leaks

Frame / Body Fasteners

Visually inspect for loose body / frame fasteners

Engine Oil Level

Verify oil level is in the SAFE range on the dipstick

Throttle

Inspect for proper operation and smooth travel

Seat Belts

Check length of belt for damage, check latches for proper operation

Coolant Level

Verify coolant level is filled to the FULL COLD mark on coolant reservoir (if engine is cold); inspect hose and radiator for leaks

Chassis / Engine Bay / Exhaust

Remove grass, leaves, foreign matter, and other flammable material or debris, especially near the exhaust system.