en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Spark Plugs

Inspect spark plugs 1 after the break-in period and every 15,000 mi (24,000 km) thereafter. Replace spark plugs every 70,000 mi (112,000 km). Always replace spark plugs in pairs.

Spark Plug Specifications

Spark Plug Type

NGK® LZMAR8AI-10

Spark Plug Gap

0.039 in (1.0 mm)

Spark Plug Torque

7.4 ft-lbs (10 N·m)

  1. Make sure the engine has cooled to room temperature.

  2. Turn the power switch off.

  3. Pull upward on the spark plug boots (not the wires) to remove the boots.

  4. To prevent debris from entering the spark plug holes, use compressed air to clean the area around the plugs before removing them.

    Tool: 14 mm plug socket

    CAUTION
    Wear eye and face protection when using pressurized air.

  5. Reinstall the spark plugs or install new plugs.

  6. Reinstall the spark plug boots.

    IMPORTANT

    The spark plug boot is fully seated when the third rib on the boot is level with the spark plug hole as shown.