en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Shock Preload Adjustment

NOTICE
This procedure is for motorcycles with manual preload suspensions only.

To adjust the shock preload, perform the following procedure:

  1. Remove left-hand side cover. See Side Covers.

  2. Look up suspension setting for the specific loading according to chart (decal applied to the inside of the left-hand upper body panel).

  3. Use the 10 mm speed wrench and extension provided in the tool kit to set adjuster to proper setting 1.

NOTICE
The numbers are biased towards the line which they represent.

Shock: Hydraulic Adjustment Setting

Total Cargo + Riders (lbs) No Trunk Settings Painted Trunk Settings  
150 1 3

CAUTION: DO NOT USE IMPACT TOOLS OR EXCEED 10 FT-LBS OF TORQUE WHEN ADJUSTING. DAMAGE TO COMPONENTS MAY OCCUR.
175 1 3
200 2 3
225 2 4
250 2 4
275 3 5
300 3 5
325 3 6
350 4 6
375 4 7
400 4 7
425 4 8
450 5 8
475 5 N/A
500 5 N/A