Electronic Shock Preload (If Equipped) Calibration
The electronic shock E-Preload feature may require calibration in the event of an error. Follow the on-screen prompts while maintaining control of the stationary vehicle. The electronic shock preload calibration procedure will automatically cycle the shock to the highest and lowest preload positions.
The calibration can be initiated using the following steps on the Ride Command display:
-
Press the Menu/Control button to bring up the Control Panel.
-
Tap on the All Settings button.
-
Tap on the Vehicle 1 button.
-
Tap the Shock Preload button.
-
Tap the Advanced 2 button.
-
Tap the Calibrate 3 button.
-
Follow the on-screen prompts.
