en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

AGM Battery Testing Procedure

  1. Test battery using the battery tester PU-50296.

  2. If the tester indicates a test result other than “Good Battery,” follow the steps below before replacing the battery:

    1. Connect battery to the recommended battery charger. If charging sequence begins as normal, fully charge battery and proceed to step 3.

      The time listed on the PU-50296 battery tester printout is an estimate. The recommended automatic charger will indicate when the battery is fully charged on its display.

    2. If charging sequence does not initialize, refer to AGM Battery Charging Recommendations – Deeply Discharged (below 3 volts) to attempt to restore the deeply discharged battery. If charging sequence will not finish as intended, the battery needs to be replaced.

  3. Re-test battery. If the test results show that battery failed, proceed with battery replacement.

Parent topic: Battery Charging