en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Engine Oil Level

The oil fill cap and dipstick are located under the hood, on the engine. Always use the recommended oil.

NOTE
The engine must be at normal operating temperature when checking or changing the oil. Do not check or change the oil when the engine is cold.

  1. Position the vehicle on a level surface. Place the transmission in neutral. Engage the park brake.

  2. Start the engine and allow it to idle for 2-3 minutes. Stop the engine.

  3. Wait 3 minutes before checking the oil level. This allows the oil to settle to the bottom of the crankcase. Do not check the oil level immediately after stopping the engine.

  4. Open the hood. See Hood.

  5. Remove the dipstick 2. Wipe it dry with a clean cloth.

  6. Reinstall the dipstick. Make sure it’s fully seated.

  7. Remove the dipstick and view the oil level. Maintain the oil level between the MIN and MAX marks on the dipstick 3. Add oil if necessary. Do not overfill.

NOTICE
A rising oil level between checks in cool weather driving can indicate contaminants such as fuel or moisture collecting in the crankcase. If the oil level is over the full mark, change the oil immediately.

Parent topic: Engine Oil