en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

LED Light Assemblies

LED lights are not serviceable. If one of the LED lamps fails to illuminate, the entire light assembly must be replaced.

  1. Remove the rear body panel to access the light assembly.

  2. Remove the screws 1 securing the light assembly to the vehicle (taillight assembly shown).

  3. Unplug the electrical connector 2 from the light assembly.

  4. Remove the light assembly.

  5. Install the electrical connector to the replacement light assembly.

  6. Reinstall the light assembly. Tighten the screws.

    TORQUE
    3 ft-lbs (4 Nm)

  7. Reinstall the rear body panel. Tighten the screws.

    TORQUE
    5.4 ft-lbs (7 Nm)