en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Fluid Change

  1. Elevate the vehicle using appropriate jack stands. Make sure the elevated vehicle is level.

  2. Remove the fill plug 1.

  3. Place a drain pan under the drain plug 2.

  4. Remove the drain plug. Allow the fluid to drain completely.

  5. Clean and reinstall the drain plug. Torque to specification.

    TORQUE
    10-14 ft-lbs (14-19 Nm)
    NOTE
    Use a syringe to add the fluid. If a syringe is not available, remove the battery and use a funnel and tube to add the fluid.

  6. Add the recommended fluid. Do not overfill. Maintain the fluid level at the bottom edge of the fill hole.

    CAPACITY
    23.7 oz (700 ml)

  7. Reinstall the fill plug. Torque to specification.

    TORQUE
    10-14 ft-lbs (14-19 Nm)

  8. Check for leaks. Dispose of used fluid properly.

Parent topic: Angle Drive Fluid