en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Changing the Passcode

The factory-set passcode is 0000. Enter this passcode at step 5 the first time you change the passcode.

  1. Unlock the security system. See Unlocking the Security System.

  2. With the engine off and the park brake engaged, press and release the MODE button repeatedly until “SECURE” displays in the gauge.

  3. Press and hold the MODE button until “SETCODE” displays.

  4. Press and hold the MODE button until “OldCodE” displays.

  5. Enter your existing passcode using the same process used to unlock the system.

  6. If the passcode is not correct, “bAd COdE” displays. Re-enter the correct passcode. If the passcode entered is correct, “NEWCodE” displays.

  7. Enter your new passcode using the same process used to unlock the system.

  8. When “CONFIRM” displays, re-enter the new passcode to confirm.

  9. If the two entries do not match, “bAd COdE” displays and you’ll be returned to step 7. If the two entries match, “SUCCESS” displays. The passcode has been changed.

  10. Record your new passcode and keep it in a safe location. Do not place your 4-digit passcode anywhere in the vehicle.

Parent topic: Security System (Canada)