en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Outer Headlamps

  1. Pull the sealing boot away from the back of the bulbs and housing.

  2. Press the looped end of the wire bulb retainer clip and swing the end toward the center of the bulb to release it from the latch tab.

  3. With the wire connector attached, pull the bulb out.

  4. Disconnect the wire harness. Install the new bulb and secure the retainer.

  5. Reinstall the sealing boot. Make sure it seals tightly around the bulb base and lens to seal off from moisture.

Parent topic: Headlamp Bulb Replacement