en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Throttle Block Alignment

  1. Slightly loosen the set screw 4 on the bottom of the throttle block housing.

  2. Move the control block to desired position.

  3. Torque the set screw to specification. Do not over-torque.

  4. With the engine off, test throttle lever movement after tightening the screw.


TORQUE

Throttle Block Set Screw

27 in-lbs (3 N·m)

Parent topic: Handlebar Component Alignment