en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Vehicle Immersion

If your vehicle becomes immersed, major engine damage can result if the machine is not thoroughly inspected. Take the vehicle to your dealer before starting the engine. If it's impossible to take your ATV to a dealer before starting it, follow the steps outlined below.

  1. Move the ATV to dry land or at the very least, to water below the footrests.

  2. Check the air box. If water is present, dry the air box and replace the filter with a new filter.

  3. Remove the spark plug.

  4. Turn the engine over several times using the electric start.

  5. Dry the spark plug. Reinstall the plug or install a new plug.

  6. Attempt to start the engine. If necessary, repeat the drying procedure.

  7. Take the ATV to your dealer for service as soon as possible, whether you succeed in starting it or not.

  8. If water has been ingested into the PVT, follow the procedure for drying out the PVT in the PVT Drying section.