Handlebar Adjustment
The handlebars can be adjusted for rider preference.
NOTICE
Improper adjustment of the handlebars or incorrect
torquing of the adjuster block tightening bolts can cause limited
steering or loosening of the handlebars, resulting in loss of control.
Follow the adjustment procedures exactly, or see your authorized dealer
for service.
-
Remove the upper headlight pod.
-
Loosen the four handlebar bolts.
-
Adjust the handlebar to the desired height.
-
Be sure the handlebars do not contact the gas tank or any other part of the machine when turned fully to the left or right.
-
Torque the front two bolts 1 to 14-17 Nm, then torque the rear two bolts. A gap of up to 3 mm will remain at the rear of the clamp blocks.
