en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Lubrication Guide

Check and lubricate all components at the intervals outlined in the Periodic Maintenance Chart. Items not listed in the chart should be lubricated at the General Lubrication interval.

The a-arms and upper control arms are lubricated at the factory, and no additional lubrication will be needed. However, if these components are subjected to severe use, grease zerks have been provided for additional lubrication at the user's discretion.

Item

Recommended Lubricant

Capacity at Fluid Change

Inspection Procedure

Engine Oil

PS-4 5W-50

4-Cycle Oil

1.9 l

(2 qt.)

Maintain level in safe range on dipstick. See Engine Oil.

Brake Fluid

DOT 4 Brake Fluid

---

Maintain level between fill lines. See Brake Fluid.

Transmission Oil

AGL Gearcase Lubricant & Transmission Fluid

1000 ml

(34 oz.)

Maintain level at bottom of fill hole threads. See Transmission Oil.

Demand Drive Fluid (Front Gearcase)

Demand Drive Fluid

275-300 ml

(9-10 oz.)

Maintain level at bottom of fill hole threads. See Front Gearcase (Demand Drive) Fluid.

Rear Gearcase Oil

ATV Angle Drive Fluid (or GL5 80-90 weight gear lube)

150 ml

(5 oz.)

See Rear Gearcase Oil

Front Prop Shaft Yoke

U-Joint Grease

---

Grease fittings (3 pumps maximum) every 800 km (500 miles), before long periods of storage, or after pressure washing or submerging.

1 Front Prop Shaft Yoke