en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Priming the Fuel System

If the motorcycle runs out of fuel, prime the fuel system before attempting to restart the engine.

  1. Fill the fuel tank.

  2. Turn the ignition key to the ON position.

  3. Move the engine stop/run switch to the RUN position.

  4. Allow the fuel pump to run until it stops (about 2 seconds).

  5. Move the engine stop/run switch to the STOP position and wait 15 seconds.

  6. Repeat steps 3–5 four to five times.

  7. Turn the key to the OFF position.

  8. Start the engine. See Starting the Engine.