|
Chassis Fault |
The alert symbol illuminates if a chassis
fault occurs. |
|
Low Fuel |
This lamp illuminates when 0.53 gal
(2.0 l) of
fuel remains in the tank. |
|
Neutral |
This lamp illuminates when the transmission
is in neutral. |
|
High Beam |
The lamp illuminates when the headlight switch
is set to high beam. |
|
Turn Signal |
The turn signal indicators flash when the
left, right, or both turn signals (hazard) are active. If there is
a problem in the signal system, the lamps will flash at twice the
normal rate. |
|
ABS Not Activated |
The indicator remains on until the ABS activates,
which occurs when vehicle speed exceeds 6 mph
(10 kph). When the lamp is illuminated,
the anti-lock brakes will not activate, but the conventional brake
system will continue to operate normally. The lamp will also illuminate
if an ABS fault is detected. |
|
Check Engine |
If this lamp illuminates while the engine
is running, see your dealer promptly. The light will remain on
if the tilt sensor shuts down the engine. If abnormal sensor or engine
operation is detected the light will remain on as long as the fault
condition exists. Retrieve the error codes for diagnosis. If a misfire
is detected, the check engine lamp will begin to flash and fuel will
be cut to the affected cylinder(s). |
|
Engine Overheat |
The engine overheat light will illuminate
when the engine temperature exceeds normal operating temperature. |