en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Rear Shock Preload Adjustment

  1. Place the motorcycle in an upright position with the front wheel clamped in a wheel vise.

  2. Using shock spanner wrench (2884176) loosen the lock nut 1 by turning it counter-clockwise (as viewed from the top of the shock).

  3. Spray a light lubricant on the adjuster nut where it contacts the spring.

  4. Adjust shock preload by rotating the adjuster nut clockwise (as viewed from the top of the shock) to INCREASE preload (firm) or counter-clockwise to DECREASE preload (softer).

  5. Recheck the preload measurement after adjusting.

  6. Tighten the lock nut securely against the adjuster nut.