Front Gearcase Fluid Replacement

The drain plug 1 is located on the bottom of the gearcase.

1. Park the vehicle on a flat, level surface.

2. Make sure the vehicle is in PARK and remove the key.

3. Place a drain pan under the drain plug.

4. Through the front-right wheel well, clean the area around the fill plug.

5. Remove the fill plug.

6. Clean the area around the drain plug.

7. Remove the drain plug. Allow the fluid to drain completely.

8. Before reinstalling, clean any dirt or debris from the fill and drain plugs. Inspect the O-rings on both plugs and replace if necessary.

9. Reinstall the drain plug and torque to specification.

   TORQUE

   Front Gearcase Drain Plug:

   8-10 ft-lbs (11-14 N·m)

10. Fill the gearcase through the fill plug hole until fluid reaches the bottom threads and begins to spill out.

11. Reinstall the fill plug and torque to specification.

    TORQUE

    Front Gearcase Fill Plug:

    8-10 ft-lbs (11-14 N·m)

12. Clean any residual fluid off the vehicle and inspect for leaks.

13. Dispose of the used fluid properly.