Passenger Hand Hold / Lug Wrench

Adjusting Passenger Hand Hold

Always adjust the hand hold to a comfortable position for your passenger before operating. Make sure the adjustment knob 1 is fully locked after making adjustments.

1. Release the lever lock 1 by rotating downward.

2. Pull or push the bar to desired position.

3. Turn adjustment knob 3 until finger tight.

4. Lock the passenger hand hold in place by rotating lever lock upward.

5. Push and pull on the hand hold to verify it is secure.

   • If the hand hold is not secure, rotate the lever lock 1 downward, then repeat steps 3–5.

Removing Passenger Hand Hold

1. Release the lever lock by rotating downward 1.

2. Remove the pin 2.

3. Pull the bar out.

Reinstalling Passenger Hand Hold

1. Ensure the lever lock 1 is downward.

2. Push in the bar and adjust to desired position.

3. Put the pin through the lever lock2.

4. Lock the passenger hand hold in place by rotating lever lock 1 upward.

5. Turn adjustment knob 3 until finger tight.

6. Push and pull on the hand hold to verify it is secure.

   • If the hand hold is not secure, rotate the lever lock 2 downward, then repeat steps 3–5.