Transmission Fluid Replacement

The drain plug 1 is located on the bottom of the gearcase. Access the drain plug through the drain hole in the skid plate.

1. Park the vehicle on a flat, level surface.

2. Make sure the vehicle is in PARK and remove the key.

3. Place a drain pan under the transmission.

4. Clean the area around the fill plug.

5. Using an 8mm Allen socket, remove the fill plug.

6. Clean the area around the drain plug.

7. Using an 8mm Allen socket, remove the drain plug and allow the fluid to drain completely.

8. Clean any dirt or debris from the fill and drain plugs. Inspect both plugs and make sure the sealing surfaces are free of any burrs, nicks, or scratches. Replace if necessary.

9. Inspect the O-rings on both plugs. Replace if necessary.

10. Reinstall the drain plug and torque to specification.

    TORQUE

    Transmission Drain Plug:

    10-14 ft-lbs (14-19 N·m)

11. Fill the gearcase through the fill plug hole until fluid reaches the bottom threads and begins to spill out.

12. Reinstall the fill plug and torque to specification.

    TORQUE

    Transmission Fill Plug:

    10-14 ft-lbs (14-19 N·m)

13. Clean any residual fluid off of the vehicle and inspect for leaks.

14. Dispose of the used fluid properly.