en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Polaris Maintenance Schedule

The intervals shown are based on vehicles operated under normal conditions.

Each interval is given in hours and miles (kilometers). Items should be serviced at whichever interval comes first following the Initial Break-In Service.

Continue to reference the following maintenance schedules at the given intervals as hours and miles (kilometers) increase on the vehicle.

Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, short trip cold weather operation, and prolonged high speed operation.

Initial Break-In Service
First 25 Hours / 1 Month / 500 Miles (800 km)
Engine Oil and Filter Change the engine oil and filter.
Engine Air Filter Inspect air filter; replace as necessary. Ensure proper installation of filter and airbox cover. Inspect ducts and screens; clean and replace as necessary.
Brake System Initial inspection; replace as necessary.
General Lubrication Inspect, lubricate, and adjust as necessary.
Tires Initial inspection; replace as necessary.
Battery Test battery condition and charge level. Check terminals; terminals should be tight and free of corrosion. Clean, test, and replace as necessary.
Front Gearcase Fluid Change fluid.
Transmission Fluid Initial fluid level inspection; adjust fluid level as necessary.
Drive Belt Inspect, clean, and replace as necessary.
Clutches Inspect weights, bushings, rollers, wearable parts; clean; replace worn parts as needed.
Spark Arrestor Inspect; clean as needed.
Shift Cable/Linkage Inspect; adjust as needed.
The break-in period consists of the first 25 hours of operation. Careful treatment of a new engine and drive components will result in more efficient performance and longer life for these components. The items outlined in this service interval only need to be performed at the first 25 hours of operation. They do not need to be performed every 25 hours.
* It is recommended to have an authorized Polaris dealer perform these services.

Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, short trip cold weather operation, and prolonged high speed operation.

Every 25 Hours / 500 Miles (800 km) or 6 months following Initial Break-In Service
Engine Air Filter Inspect air filter; replace as necessary. Ensure proper installation of filter and airbox cover. Inspect ducts and screens; clean as necessary.
Battery Test battery condition and charge level. Check terminals; terminals should be tight and free of corrosion. Clean, test, and replace as necessary.
Brake System Inspect brake pad wear. Inspect hoses for damage. Replace as necessary.
General Lubrication Inspect, lubricate, and adjust as necessary.
Tires Inspect; Adjust pressure level as needed; Inspect wear and replace as needed.
* It is recommended to have an authorized Polaris dealer perform these services.

Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, short trip cold weather operation, and prolonged high speed operation.

Every 50 Hours / 1000 Miles (1600 km) or 12 months following Initial Break-In Service
Engine Oil and Filter Change the engine oil and filter.
Engine Air Filter Inspect air filter; replace as necessary. Ensure proper installation of filter and airbox cover. Inspect ducts and screens; clean as necessary.
Battery Check terminals; terminals should be tight and free of corrosion. Clean, test, and replace as necessary.
Brake System Inspect brake pad wear. Inspect hoses for damage. Replace as needed.
General Lubrication Inspect, lubricate, and adjust as necessary.
Radiator Inspect; Clean external surfaces.
Tires Inspect; Adjust pressure level as needed; Inspect wear and replace as needed.
Spark Plug Inspect; replace as needed.
Wiring and Connectors Inspect for wear, routing, and retention. Clean as necessary.
Front Gearcase Fluid Change fluid.
Transmission Fluid Change fluid.
Drive Belt Inspect, clean, and replace as necessary.
Clutches Inspect weights, bushings, rollers, wearable parts; clean; replace worn parts as needed.
Suspension Components / Alignment* Inspect front and rear suspension bushings, and ball joints for loose or worn components; replace as needed. Inspect shock absorbers for leaks or damage.
Cooling System Fluid level inspection; inspect for fluid leaks; add coolant if needed. Inspect coolant strength seasonally; pressure test system yearly.
Wheel Bearings Inspect; replace as needed.
Fuel System* Cycle key to pressurize fuel pump; check for leaks at fuel system connections, check for leaks at fill cap.
Throttle Body / Intake Ducts Inspect ducts for proper sealing / air leaks.
Shift Cable / Linkage Inspect; adjust as needed.
Steering System and Components Inspect; Replace or rebuild if necessary.
* It is recommended to have an authorized Polaris dealer perform these services.

Vehicles subjected to severe use must be serviced at 50% of the stated interval. Examples of Severe Use: Frequent immersion in mud, water, or sand, constant high RPM use, prolonged low-speed heavy load operation, extended idle, short trip cold weather operation, and prolonged high speed operation.

Additional Maintenance Intervals

Every 50 Hours/ 1000 miles (1600KM) / 12 Months after break-in service

Spark Arrester Inspect; clean as needed.

Every 2000 miles (3200KM) / 24 months

Brake Fluid Replace fluid; bleed system.

Every 2500 miles (4000KM)

Shock Absorbers* Replace or rebuild (replace seals and fluid, if applicable).

Every 5000 miles (8000KM) / 60 months

Coolant Change fluid.

Every 10,000 miles (16,100KM) / 500 hours

Valve Clearance* Inspect; adjust as needed.
* It is recommended to have an authorized Polaris dealer perform these services.

Parent topic: Periodic Maintenance Chart