Pre-Ride Inspection
CAUTION
Failure to inspect and verify that the vehicle
is in safe operating condition before operating increases the risk
of an accident. Always inspect the vehicle before each use to make
sure it's in safe operating condition.
| Item | Remarks | Ref. |
| Brake system/lever travel | Ensure proper operation |
Brakes
Front Brake Inspections |
| Brake fluid | Ensure proper level | Brakes |
| Foot brake | Ensure proper operation | Brakes |
| Front suspension | Inspect, lubricate if necessary | Lubrication Recommendations |
| Rear suspension | Inspect, lubricate if necessary | Lubrication Recommendations |
| Steering | Ensure free operation, lubricate if necessary | – |
| Tires | Inspect condition and pressure | Tires |
| Wheels/fasteners | Inspect, ensure fastener tightness; check that axle nuts are secured by cotter pins | Tires |
| Frame nuts, bolts, fasteners | Inspect, ensure tightness | - |
| Fuel and oil | Ensure proper levels |
Choke
Oil Recommendations |
| Coolant level (if applicable) | Ensure proper level | – |
| Coolant hoses (if applicable) | Inspect for leaks | – |
| Grass and debris | Remove grass, leaves, foreign matter, and other flammable material or debris, especially near the exhaust system | – |
| Throttle | Ensure proper operation |
Throttle Lever
Throttle Cable Freeplay |
| Indicator lights/switches | Ensure operation | Switches / Buttons |
| Engine Stop Switch | Ensure proper operation | Engine Stop Switch |
| Air filter, pre-filter | Inspect and clean, or replace | Air Filter |
| Air box sediment tube | Drain deposits whenever visible | – |
| Headlight | Check operation, apply POLARIS dielectric grease when lamp is replaced |
Switches / Buttons
Lights |
| Brake light/tail lamp | Check operation, apply POLARIS dielectric grease when lamp is replaced | Lights |
| Riding Gear | Wear helmet, goggles, protective clothing | Safe Riding Gear |