en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Carburetor

Your POLARIS ATV is calibrated at the factory for optimal performance at altitudes ranging from zero to 4,000 feet (1200 m) and temperatures above 15° F (-9° C). Refer to the specifications section for carburetor and jetting specifications.

Any jetting changes must be made only by an authorized POLARIS dealer or other qualified service facility.

TIP
Continuous operation of the engine without proper jetting when required can cause poor performance, overheating, or engine damage. See your POLARIS dealer or other qualified personnel for more information about jetting for conditions in your area.

Carburetor / Engine Idle RPM Adjustment

If the engine idle speed is not satisfactory, and all other conditions are favorable, the carburetor can be adjusted.

  1. Place the transmission in gear.

  2. Lock the parking brake.

  3. Start the engine and allow it to warm up for approximately five minutes.

  4. Turn the carburetor idle screw in (clockwise) to raise RPM. Turn the screw out (counter-clockwise) to lower RPM.