en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Handlebars

WARNING
Improper adjustment of the handlebars or incorrect torquing of the adjuster block tightening bolts can cause limited steering or loosening of the handlebars, resulting in loss of control and serious injury or death. Follow the adjustment procedures exactly, or see your POLARIS dealer for service.

The handlebars can be adjusted for rider preference.

  1. Remove the handlebar cover 1.

  2. Loosen (do not remove) the four handlebar clamp bolts 2.

  3. Adjust the handlebar to the desired height.

  4. Be sure the handlebars do not contact the gas tank or any other part of the machine when turned fully to the left or right.

  5. Tighten the front handlebar clamp bolts first, then tighten the rear bolts. Torque to 25 ft. lbs. (34 Nm).

  6. Reinstall the handlebar cover. Tighten screws 3 to 3.5 ft. lbs. (4.7 Nm).