en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Transporting the Vehicle

Follow these procedures when transporting the vehicle.

  1. Apply the brakes.

  2. Place the transmission in PARK. Stop the engine.

  3. Slowly release the brake pedal and make sure the transmission is in PARK before exiting the vehicle.

  4. Remove the key to prevent loss during transporting.

  5. Secure the fuel cap and seat. Ensure that the seat is attached correctly and is not loose.

    WARNING

    Cargo and other loose vehicle parts may fly off while transporting this vehicle. Secure or remove all cargo, and inspect the unit for loose parts prior to transport.

  6. Secure the front tip out windshield (if equipped) in the closed position.

  7. Close and latch all doors (if equipped) and tailgate.

  8. Using suitable straps or rope, always secure the vehicle to the trailer using the designated tie down points (front and rear).

Front Tie-Down Location
1 Front tie-down points

NOTICE
D-Rings (if equipped) are an optional recovery location. Do not pull on the d-ring on an angle greater than 30 degrees from center.

Rear Tie-Down Locations
2 Rear tie-down points

Parent topic: Cleaning and Storage