Spark Arrester
-
Never operate the vehicle without the spark arrester.
-
Remove any combustible materials from the area.
Failure to heed the following warnings while servicing the spark arrester could result in serious injury or death.
-
Never run the engine in an enclosed area. Exhaust contains poisonous carbon monoxide gas that can cause loss of consciousness or death in a very short time.
-
Do NOT perform service on the spark arrester while the system is HOT. Exhaust system temperatures can reach extreme temperatures. Allow components to cool sufficiently before proceeding.
-
Do not stand behind or in front of the vehicle while purging the exhaust system.
-
Never go under the vehicle while it is inclined.
-
Wear eye protection and gloves while servicing.
Use the following procedure to periodically purge accumulated carbon from the exhaust pipe.
-
Turn off engine and allow exhaust to cool sufficiently.
-
Remove the spark arrester from the tailpipe of the muffler.
-
Remove any debris from spark arrester and the tailpipe.
-
Inspect spark arrester for holes in mesh screen. Replace as needed.
-
Replace spark arrester and torque bolt to specification.
TORQUESpark Arrester Bolt
7.4 ft-lbs (10 N·m)