en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Headlight Beam Adjustment

To adjust the headlight beam, do the following:

  1. Ensure the tire pressure of all tires is at recommended levels.

  2. Place the vehicle on a level surface with the headlight approximately 25 ft. (7.6 m) from a dark wall.

  3. Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height.

  4. Apply the brakes. Start the engine. Turn on the low-beam headlights.

  5. Observe the headlight aim. The most intense part of the headlight beam should be aimed 8" (20 cm) below the mark placed on the wall. Include the weight of a rider on the seat while performing this step.

  6. If a headlight needs adjustment, locate the three adjustment screws 1 at the back of each headlight (one on top, two on the bottom).

    NOTE
    The top headlight adjuster can be accessed from under the hood. The lower headlight adjustment screw can be accessed through the wheel well.

  7. Rotate the adjustment screw to adjust the headlight as needed.

Parent topic: LED Lights