en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Washing Tips

  • Avoid the use of harsh cleaners, which can scratch the finish.

  • Do not use medium to heavy duty compounds on the finish.

  • Always use clean cloths and pads for cleaning and polishing. Old or reused cloths and pads may contain dirt particles that will scratch the finish.

  • Grease all zerk fittings immediately after washing. Allow the engine to run for a while to evaporate any water that may have entered the engine or exhaust system.

If a high pressure water system is used for cleaning, exercise extreme caution. The maximum pressure should not exceed 4000 PSI, 2.5 GPM with a 40° pressure washer nozzle. Make sure to keep the pressure washer nozzle 23.6 in (60 cm) from the vehicle. The water may damage components and could remove paint and labels. Avoid directing the water stream at the following items:

  • Wheel bearings

  • Radiator

  • Transmission seals

  • Brakes

  • Door seals (if equipped)

  • Cab and body panels

  • Labels and decals

  • Electrical components and wiring

  • Air intake components

  • Window seals (if equipped)

  • Throttle and shift cables and controls

If an informational or graphic label becomes illegible or comes off, contact your authorized POLARIS dealer, or other qualified person, to obtain a replacement. Replacement safety labels are provided by POLARIS at no charge.

Parent topic: Washing the Vehicle