Air Filter
-
Detach maintenance cover.
-
If necessary, move fuel hoses out of the way to expose air box.
-
Remove two screws 1 to open the air box.
-
Extract air filter from box.
-
If filter is dirty or torn, replace it with a new one.
-
Re-install air box cover and secure with screws.
-
Move fuel hoses back into position.
-
Re-install the maintenance cover.
Foam Filters
If using a foam air filter, follow the steps below to clean the filter before replacing it in the air box.
-
Submerge the filter in a solution of warm water and household detergent.
-
Let the filter soak in the solution for a few minutes and then squeeze out the excess water.
-
Repeat step 2 several times to ensure the water coming from the filter is clean. Then let the filter dry completely.
-
Once dry, pour air filter oil onto the filter and distribute evenly. Be sure to rid the filter of excess oil.
NOTICEThe use of air filter oil allows the filter to catch even the smallest particles of dirt and dust. -
If at any point during the cleaning process the filter becomes damaged, then it must be replaced prior to operating your generator.