Oil Change
-
Start the engine and allow it to run for a few minutes. Stop the engine.
-
Position the fuel valve switch to OFF.
-
Elevate the generator several inches above the ground.
-
Open the oil access door to expose oil drain 1.
-
Remove the oil filler cap / dipstick.
-
Place a drain pan under the generator.
-
Remove the drain bolt 2 and sealing washer 3 from the bottom of the generator.
-
Drain the used oil into a sealed container and take it to a recycling center. Do not discard the oil in a trash can, dump it on the ground, or pour it down the drain.
-
Re-install the washer and drain bolt.
-
Place provided funnel into fill valve.
-
Fill oil to the high limit mark on the dipstick. Ensure that the oil level does not rise past the threading of the cap.
CAPACITYPolaris 5W-30 Generator Oil
19.6 floz (0.58 l)
-
Remove funnel and re-install the dipstick. Do not screw in.
-
Start the engine and let run for 1 or 2 minutes. Stop the engine and check for leaks.
-
Re-check the oil level on the dipstick and add oil as needed to bring the level to the upper mark on the dipstick.
-
Re-install the dipstick.
-
Re-install oil access door securely.
-
Wash hands with soap and water after handling used oil.