en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Removing the Maintenance Cover

Use the following steps to remove the generator maintenance cover and gain access to the inner components. Before performing any maintenance, the ignition switch should be positioned to OFF.

  1. Position the ignition switch and fuel valve lever to OFF.

  2. Remove the two screws 1 from the maintenance cover.

  3. Pull down on the lip of the cover 2 to expose the inner components of the generator.

  4. Perform maintenance as needed.

  1. Upon completion of maintenance, replace cover by inserting the bottom edge into the grooves and replacing the two screws.