Battery Installation
Using a new battery that has not been fully charged can damage the battery and result in a shorter life. It can also hinder generator performance. Follow the instructions in the Battery Charging section before installing the battery.
-
Ensure that the battery is fully charged.
-
Place the battery in the battery holder.
-
Coat the terminals with dielectric grease or petroleum jelly.
-
Secure the battery hold-down strap.
-
Connect and tighten the red (positive) cable first.
-
Connect and tighten the black (negative) cable last.
-
Verify that cables are properly routed. Cables should be safely tucked away at the front and rear of the battery.
-
Re-install the battery access panel.