en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Side Panel / Footwell Installation

LEFT SIDE PANEL / FOOTWELL

  1. Install the footwell onto the vehicle. Loosely install the six screws and nuts into the bottom of the footwell.

    NOTICE
    Observe the condition of each push rivet and check for damage. If damaged, POLARIS recommends that you replace the push rivet before installation.

  2. Loosely install the two screws and two push rivets into the footwell.

  3. Install the side panel / close off panel onto the vehicle and install the three push rivets.

  4. Install the seat.

  5. Torque all fasteners to specification.

    TORQUE

    Footwell to Chassis Fasteners:

    3 in-lbs (4 N·m)

    Footwell to Rear Cab Screws:

    Torque Until Fully Seated

RIGHT SIDE PANEL / FOOTWELL

  1. Install the footwell onto the vehicle. Loosely install the six screws and nuts into the bottom of the footwell.

    NOTICE
    Observe the condition of each push rivet and check for damage. If damaged, POLARIS recommends that you replace the push rivet before installation.

  2. Loosely install the two screws and two push rivets into the footwell.

  3. Install the close off panel / shield onto the vehicle.

  4. Install the side panel onto the vehicle and install the two push rivets.

  5. Install the seat.

  6. Torque all fasteners to specification.

    TORQUE

    Footwell to Chassis Fasteners:

    3 in-lbs (4 N·m)

    Footwell to Rear Cab Screws:

    Torque Until Fully Seated