en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Headlight Aim Adjustment

Challenger and Pursuit Models

Chieftain PowerPlus and Roadmaster PowerPlus Models

The headlamp adjustment screws 1 are located inside the headlamp housing.

  1. Remove the headlight bezel by prying down at the top center to release the retention detent. Then pull forward from the top to release the side retention clips.

  2. To adjust the headlamp vertically, tighten both top adjustment screws equally to adjust the beam upward. Loosen both screws equally to adjust the beam downward.

    Tool: M4 hex wrench or universal tool

  3. To adjust the headlamp horizontally, while facing the headlight, loosen the left side screw to adjust the beam to the left. Loosen the right side screw to adjust the beam to the right.