en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Starting the Engine

  1. Apply brake.

    NOTICE
    Engine will not start if brake lever is not actuated.

  2. Turn the key to the ON position.

  3. Pull the engine stop switch up to the RUN position.

  4. Turn the key to START to crank the engine. Release the key to the ON position when the engine starts.

  5. If engine does not immediately start, hold the key in the START position for a maximum of 10 seconds, or until the engine starts. Repeat if necessary. When possible, use block heater for assistance with starting in colder temperatures.

CAUTION
To avoid injury and/or engine damage, do not operate the electric starter while the engine is running.
NOTICE
Operating the vehicle immediately after cold starting could cause engine damage. Allow the engine to warm up for several minutes before operating the vehicle. If cold drive-away is attempted, the engine RPM may stumble slightly to protect the engine.

In this section:

  1. Restarting the Engine