Fuel Pump Prime Procedure
The fuel injection system must be purged of air:
-
If the fuel system was run out of fuel
-
If the fuel system has been disassembled
Make sure there is at least 2 gallons (7.6 liters) of fuel in the fuel tank.
-
Start with vehicle key in OFF position.
-
Turn vehicle key to ON position without cranking.
-
Cycle the throttle lever five times within 5 seconds to open throttle.
-
Turn vehicle key to START. Crank until vehicle starts or 20 seconds have passed.
IMPORTANTTurning vehicle key to OFF position will restart the procedure. -
If vehicle fails to start, repeat Steps 1–4 up to four times.