en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Lock Vehicle

Snowmobiles equipped with a 7S display have the ability to lock the snowmobile into a low power mode until a security passcode is entered. Locking the snowmobile using the Lock Vehicle button will limit the vehicle’s RPM so the vehicle will remain motionless.

NOTICE
The vehicle can be locked only when the engine is running and the vehicle is not in motion. If the engine is OFF, the Lock Vehicle button will be disabled.

Changing your Passcode

A default passcode is available at the time of vehicle purchase. Changing the passcode will always require the old passcode. To change the security passcode, do the following:

  1. Press the Polaris button to open the Badge Panel.

  2. Press the All Settings button and open the Vehicle Settings tab.

  3. Under Passcode Security, click “Change Passcode”.

  4. Enter the existing/old passcode.

  5. Enter the new passcode.

  6. Enter the new passcode again.

  7. A popup box should appear confirming your passcode has changed.

Locking your Snowmobile

To lock your vehicle, do the following:

  1. Stop vehicle completely. Keep the engine running.

  2. Press the Polaris Button to open the Badge Panel.

  3. Press the Lock Vehicle button.

  4. Enter your 4-digit passcode.

Locking your Snowmobile

To unlock your vehicle, do the following:

  1. Start the engine.

  2. A banner will appear that top of the display screen prompting you to enter your passcode. Click on the ribbon or the Unlock Vehicle button from the Badge Panel.

  3. Enter your 4-digit passcode.

Parent topic: Badge Panel