Skag Replacement

To replace a ski skag, do the following:

1. Raise and support the front of the snowmobile so the skis are approximately 6 in (15.2 cm) from the ground.

2. Remove the attaching ski skag fasteners 1 and pry the skag 2 downward.

3. Remove the front end of the skag.

4. Remove the rear end of the skag.

5. Reverse the steps to install a skag.

6. Torque skag fasteners to specification.

   TORQUE

   Ski Skag Fasteners

   8 ft-lbs (11 nm)