en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Driven Clutch Removal

To access the Driven Clutch, remove the left side panel.

  1. Remove the drive belt. See Drive Belt Removal for drive belt removal procedure.

  2. Lock the parking brake.

    NOTICE

    If the transmission is in Neutral the driven clutch will spin with the parking brake on. The transmission must be in High, Low, or Reverse for the parking brake to stop the driven clutch from spinning.

  3. Remove the spare belt holder.

  4. Remove the driven clutch bolt 1 and flat washer 2.

  5. Remove the driven clutch assembly 3 from the jackshaft.

  1. Inspect the jackshaft and driven clutch splines for damage. Replace components as required.