en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Handlebar Angle

Handlebar angle can be adjusted to suit rider preference.

  1. Loosen the four bolts 1 on the top riser block.

  2. Adjust the handlebar upward or downward to the desired angle. Be sure the handlebar, brake lever and throttle lever operate smoothly and do not hit the gas tank, windshield or any other part of the machine when turned fully to the left or right.

If necessary, loosen the set screws for the left and right controls, rotate the controls slightly, then tighten the set screws to the proper torque.

  1. Torque the bolts to specification.

TORQUE

Handlebar Block Bolts

14.8 ft-lbs (20 N·m)

NOTICE

Do not stretch wires while adjusting the controls. Stretching the wires could damage the handwarmers.