en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Passenger Seat

The passenger seat is available on all Adventure Matryx models.

Passenger Seat Installation

  1. Clean the top of the tunnel with a clean shop rag, and clear any debris from inside the mounting channels.

  2. Position the passenger seat onto the tunnel above the mounting brackets 1.

  3. Connect the main seat harness connector 2 to the 12-volt power harness 3.

  1. Align the latch handles to the mounting brackets on the tunnel.

  2. Lift upward on the latch handles 4 to engage the latch pins securely within the brackets.

Passenger Seat Removal

  1. To remove the seat, lift the seat upward while pulling up on the two latch handles.

  2. Disconnect the seat harness connector from the 12-volt power harness.