en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Seat Installation

  1. Position the seat by inserting the seat mounting tabs from rear to front into the frame.

  2. Rotate the rear of the seat downward and position the rear mount seat bracket onto the fender.

  3. Thread the seat mount bolt through the seat mount bracket and into the fender. Torque the seat bolt to specification.

    TORQUE
    13 ft-lbs (18 Nm)

  4. Position the passenger seat near the fender, and push the grab strap through the seat bottom (if equipped).

  5. Lower the passenger seat onto the seat post, and push downward to engage the seat grommet to the seat post.

  6. Gently raise the rear bracket and reinstall the nylon grommet.

  7. Thread the rear bracket bolt and washer through the bracket and nylon grommet. Torque the bolt to specification.

    TORQUE
    13 ft-lbs (18 Nm)