en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Removal From Storage

  1. Install a fully charged battery.

  2. Check the oil level. If the motorcycle was stored in an area subject to wide swings in temperature and humidity (such as outdoors), change the engine oil before starting the engine.

    NOTICE
    During storage, temperature and humidity changes can cause condensation to form in the crankcase and mix with engine oil. Running the engine with oil that contains condensation can cause engine damage.

  3. Inspect the storage area for signs of fluid leaks. Identify and perform service to any leaking components.

  4. Remove any intake or exhaust mesh covers installed for rodent protection.

  5. Install new spark plugs if necessary.

  6. Perform the pre-ride inspections outlined in this manual.

  7. Perform a road test. See Road Test.

  8. Wash and polish the motorcycle. Wax, polish or apply protectant to appropriate components.