General Inspections
Item | Inspection Procedure |
---|---|
Engine Oil |
Check the oil level. See Engine Oil Level |
Fuel |
Check the fuel level. See Fueling. |
Fluid Leaks |
Check the vehicle and the ground/floor for any fuel, oil or hydraulic fluid leaks. |
Tires |
Inspect condition, pressure and tread depth. See Tire Pressure Chart. |
Brake Operation |
Inspect pedal and lever movement. |
Brake Fluid Levels |
Check front and rear brake fluid levels. |
Brake Components |
Inspect hoses and connections. |
Throttle |
Inspect hand grip and throttle movement. |
Clutch |
Check lever operation and freeplay. |
Front Suspension |
Check for leaks, debris and damage. |
Steering |
Check for smooth operation by turning handlebars full left and full right. |
Rear Suspension |
Inspect for leaks. Check shock movement and air pressure. |
Ride Height |
Make sure shock pressure is adjusted properly for load. |
Rear Drive Belt |
Check for wear or damage. Check drive belt tension. See Rear Drive Belt Cleaning. |
Sidestand |
Verify smooth operation, inspect pivot bolt and spring. |
Fasteners |
Inspect for loose, damaged or missing fasteners. |
Mirrors |
Adjust for proper rear view. |
Trunk/Saddlebags |
If equipped, make sure the trunk and saddlebags are properly installed and that lids are securely closed. |