en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Handlebar Adjustment

WARNING
Improper adjustment of the handlebars or incorrect torquing of the adjuster block tightening bolts can cause limited steering or loosening of the handlebars, resulting in loss of control and possible serious personal injury or death. Follow the adjustment procedures exactly, or see your POLARIS dealer or other qualified service person for service.

The handlebars can be adjusted for rider preference.

  1. Remove the two dart fasteners from the headlight pod.

  2. Remove pod to access the handlebar bolts 1. Loosen the four bolts.

  1. Adjust the handlebar to the desired height. Be sure the handlebars do not hit the gas tank or any other part of the vehicle when turned fully to the left or right.

  2. Lightly tighten each bolt equally to the specified torque to prevent uneven gaps in the block.

TORQUE

Handlebar Bolts

7.3 ft-lbs (10 N·m)