Hand Brake
The front and rear brakes are hydraulic disc brakes, activated by moving the single brake lever toward the handlebar. These brakes are self-adjusting.
The following checks are recommended to keep the brake system in good operating condition. Check more often if brakes are used heavily under normal operation.
-
Always keep brake fluid at an adequate level. See the Master Cylinder/Brake Fluid section for details.
-
Check the brake system for fluid leaks.
-
Check the brakes for excessive travel or spongy feel.
-
Check the friction pads for wear, damage and looseness. Replace brake pads when they are worn to .030” (0.762 mm).
-
Check the security and surface condition of the disc. Clean any grease using a recommended brake cleaner or alcohol. Do not use spray lubricants or other petroleum-based products. If you discover any damage (cracks, excessive corrosion, warping) see your dealer for service before operating.