Pre-Ride Inspection
CAUTION
Failure to inspect and verify that the vehicle
is in safe operating condition before operating increases the risk
of an accident. Always inspect the vehicle before each use to make
sure it's in safe operating condition.
Item | Remarks | Page |
---|---|---|
Brake system | Ensure proper operation | See Brake Freeplay. |
Front suspension | Inspect, lubricate if necessary | See Lubrication Recommendations. |
Rear suspension | Inspect, lubricate if necessary | See Lubrication Recommendations. |
Steering | Ensure free operation, lubricate if necessary | See Steering Inspection. |
Tires | Inspect condition and pressure | See Safety Labels and Locations for label locations and Tires for tires. |
Wheels/fasteners | Inspect, ensure fastener tightness; check that axle nuts are secured by cotter pins | See Tires. |
Frame nuts, bolts, fasteners | Inspect, ensure tightness | - |
Fuel and oil | Ensure proper levels | See Safety Labels and Locations for label locations and Fuel System for fuel system. |
Grass and debris |
Remove grass and debris from the vehicle, especially on the underside and near the exhaust system |
- |
Throttle | Ensure proper operation | See Pre-Ride Check and Throttle Controls. |
Engine Stop Switch | Ensure proper operation | See Engine Stop Switch. |
Air filter, pre-filter | Inspect and clean, or replace | See Air Filter. |
Running lights | Ensure proper operation | See Daytime Running Lights. |
Brake light | Ensure proper operation | See Tail Light. |
Drive Chain | Check condition and slack; refer to drive chain adjustment | See Drive Chain Slack Inspection. |
Loose or Damaged components | Visually inspect for any damaged components or loose fasteners | - |
Riding Gear | Wear helmet, goggles, protective clothing | See Safe Riding Gear. |