IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

2025 Timbersled Ripper Owner’s Manual

P/N 9941671

Trademarks

Unless noted, trademarks are the property of Polaris Industries Inc.

Hayes^® is a registered trademark of Hayes Bicycle Group, Inc. Honda^® is a registered trademark of Honda Motor Company, Ltd. Kawasaki^® is a registered trademark of Kawasaki Heavy Industries, Ltd. Loctite^® is a registered trademark of Henkel IP & Holding GmbH LLC. QR Code^® is a registered trademark of DENSO WAVE INCORPORATED. Yamaha^® is a registered trademark of Yamaha Hatsudoki Kabushiki Kaisha.

Copyright Information

Copyright 2024 Polaris Industries Inc. All information contained within this publication is based on the latest product information at the time of publication. Due to constant improvements in the design and quality of production components, some minor discrepancies may result between the actual vehicle and the information presented in this publication. Depictions and/or procedures in this publication are intended for reference use only. No liability can be accepted for omissions or inaccuracies. Any reprinting or reuse of the depictions and/or procedures contained within, whether whole or in part, is expressly prohibited.

The original instructions for this vehicle are in English. Other languages are provided as translations of the original instructions.

Printing

Printed in U.S.A.

i 2025 Timbersled Ripper Owner’s Manual
ii Welcome
iii Safety Symbols and Signal Words
Table Of Contents
Chapter 1: Introduction
- 1.1.1: Dear Parents / Supervising Adults:
- 1.1.2: Dear Children / Young Operators:
- 1.1.3: Important Notes for Owners and Drivers
- 1.1.4: Preservation of the Environment
- 1.1.5: Installation
- 1.1.6: Vehicle Identification Numbers
- 1.1.7: Reporting Safety Defects
Chapter 2: Safety
- 2.2.1: Operator Safety
  - 2.2.1.1: Host Bike
  - 2.2.1.2: Stay Clear of Track
  - 2.2.1.3: Riding Position
  - 2.2.1.4: Rider Capacity
  - 2.2.1.5: Riding Apparel
    - 2.2.1.5.1: Safe Riding Gear
    - 2.2.1.5.2: Helmet
    - 2.2.1.5.3: Eye Protection
    - 2.2.1.5.4: Clothing
  - 2.2.1.6: Survival Preparation
  - 2.2.1.7: Excessive Speed
  - 2.2.1.8: Hidden Obstructions
  - 2.2.1.9: Driver Awareness
  - 2.2.1.10: Disabled Operators
  - 2.2.1.11: Mountainous Terrain Riding
    - 2.2.1.11.1: Get the Safety Gear
    - 2.2.1.11.2: Get to Know Your Safety Gear
    - 2.2.1.11.3: Get the Picture
    - 2.2.1.11.4: Get Out of Harm’s Way
    - 2.2.1.11.5: Get the Forecast
    - 2.2.1.11.6: Get Avalanche Safety Training
    - 2.2.1.11.7: Avalanche Awareness
  - 2.2.1.12: Ice and Snow Build-Up
  - 2.2.1.13: Driving on Slippery Surfaces
  - 2.2.1.14: Inadequate Snow Conditions
  - 2.2.1.15: Operating in Deep Snow
  - 2.2.1.16: Driving Downhill
  - 2.2.1.17: Driving in Hilly Terrain
  - 2.2.1.18: Cold Weather Drive-Away
  - 2.2.1.19: Maneuverability
  - 2.2.1.20: Driving Responsibly
  - 2.2.1.21: Loading Your Snow Bike
  - 2.2.1.22: Windchill/Temperature Charts
    - 2.2.1.22.1: Windchill Chart (°F)
    - 2.2.1.22.2: Windchill Chart (°C)
  - 2.2.1.23: Safety Labels and Locations
    - 2.2.1.23.1: Proper Use Warning
    - 2.2.1.23.2: Towing Warning
Chapter 3: Features
- 3.3.1: Component Locations
  - 3.3.1.1: Tools
  - 3.3.1.2: Know Your Host Bike
  - 3.3.1.3: Brake Lever
  - 3.3.1.4: Cowling
  - 3.3.1.5: Track
  - 3.3.1.6: Spindle
  - 3.3.1.7: Drive Chain
  - 3.3.1.8: Shock
  - 3.3.1.9: Rail
  - 3.3.1.10: Track Tensioning Block
  - 3.3.1.11: Ski
  - 3.3.1.12: Ski Skags
Chapter 4: The Perfect Fit
- 4.4.1: Suspension Quick Setup Guide
  - 4.4.1.1: Spring Preload Adjustment (All Models)
- 4.4.2: Seat Height Adjustment
Chapter 5: Pre-Ride Inspection
- 5.5.1: Pre-Ride Checklist
- 5.5.2: Pre-Ride Suspension Inspection
- 5.5.3: Before Starting the Engine
  - 5.5.3.1: Read and Understand Your Owner's Manual
  - 5.5.3.2: Steering System
  - 5.5.3.3: Brakes
    - 5.5.3.3.1: Brake Lever Travel
    - 5.5.3.3.2: Brake Lever Feel
Chapter 6: Operation
- 6.6.1: Break-In Period
  - 6.6.1.1: Snow Bike System Break-In
- 6.6.2: Track Warm-Up
- 6.6.3: Fuel Storage
- 6.6.4: Fuel Recommendation
- 6.6.5: Daily Storage
Chapter 7: Maintenance
- 7.7.1: Host Bike Maintenance
- 7.7.2: Timbersled Recommended Maintenance Program
- 7.7.3: Periodic Maintenance Interval Table
- 7.7.4: Lubrication
  - 7.7.4.1: Chain Lubrication
- 7.7.5: Exhaust System
- 7.7.6: Suspension
  - 7.7.6.1: Suspension Maintenance
- 7.7.7: Brakes
  - 7.7.7.1: Hydraulic Brake Inspection
  - 7.7.7.2: Brake Components
  - 7.7.7.3: Brake Lever Adjustment
  - 7.7.7.4: Excessive Lever Travel
  - 7.7.7.5: Brake Fluid
- 7.7.8: Track Inspection
- 7.7.9: Ski Maintenance
- 7.7.10: Ski Skags
  - 7.7.10.1: Skag Replacement
- 7.7.11: Spindle Maintenance
- 7.7.12: Fall Tune-Up
- 7.7.13: Extended Storage
  - 7.7.13.1: Cleaning and Preservation
  - 7.7.13.2: Track and Suspension
- 7.7.14: Transporting the Snow Bike
Chapter 8: Installation
- 8.8.1: Missing or Damaged Parts
- 8.8.2: Application
- 8.8.3: Kit Contents
- 8.8.4: Tools Required
- 8.8.5: Important
- 8.8.6: Installation Instructions
  - 8.8.6.1: Motorcycle Disassembly
  - 8.8.6.2: Rear Timbersled Ripper Assembly
  - 8.8.6.3: Brake Line Assembly and Routing
  - 8.8.6.4: Drive Chain and Sprocket Assembly
  - 8.8.6.5: Front Ski and Spindle Assembly
  - 8.8.6.6: Rear Cowling Assembly
Chapter 9: Specifications
- 9.9.1: Timbersled Ripper
- 9.9.2: Torque Tables
  - 9.9.2.1: Rails and Track
  - 9.9.2.2: Spindle and Ski
  - 9.9.2.3: Drive Chain Assembly
  - 9.9.2.4: Brakes
Chapter 10: Warranty
- 10.10.1: Timbersled Conversion Systems
  Limited Warranty
Chapter 11: Maintenance Log
- 11.11.1: Maintenance Log
Index