en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Phone Screen

Connect a smart phone and headset to listen to audio, make and receive calls and text messages, access a phone’s contact list, and call history.

Connect your Phone to the Display

The Ride Command display is compatible with Android and iOS. Go to https://ridecommand.polaris.com/en-us/supported-devices for latest operating system compatibility.

Connect your Bluetooth® device to do the following:

  • Connect your Bluetooth® device to pair and connect phones and Bluetooth® headsets.

  • List of paired devices with connection status.

  • For phones, shows signal strength.

  • Listen to music over a headset or through optional vehicle speakers.

iPhone

To connect your iPhone to the display, do the following:

  1. In your iPhone settings turn on Bluetooth®. If available, make your phone discoverable to other devices in your iPhone’s Bluetooth® settings. When your phone appears on the display press the “+” button next to it.

  2. A prompt will appear on your iPhone requesting permission to pair with your phone.

  3. Ensure the confirmation code on the screen and your phone are the same then press “Pair” on your phone.

  4. For optimal experience, enable notifications and sync contacts from your smartphone’s Bluetooth® settings.

Android

To connect you Android device to the display, do the following:

  1. From your smartphone settings, open the Bluetooth® options on your device and ensure that Bluetooth® is turned on.

    NOTE
    On some phones you have to make the phone visible to other devices. If your phone has this feature, it should show up on the Bluetooth® connection screen of your phone. If no option exists to make your phone visible to the display, it is already visible to the display.

  2. Press the add device button, then press “OK” on the display.

  3. When your phone appears on the display press the “+” button next to it to pair with your phone.

  4. Ensure the confirmation code on the screen and your phone are the same then press “OK” on your phone.

  5. For optimal experience press “Accept” on your phone when requested to access contacts and messages.

  6. The display will now show a list of previously connected phones on the display. If it is unpaired, click on your phone from the list.

  7. Once the display says connected/paired, your phone is now connected to the display via Bluetooth®. After a phone is connected, the Device Manager Screen will appear.

  8. When a smartphone is connected to the display via Bluetooth®, users are able to make phone calls from the display through the keypad, recent calls, or their contacts by pressing the phone icon in the device manager screen or through the pull down menu.

    NOTICE
    Ensure that your smartphone Bluetooth® settings are set to share phone calls, media audio, text messages, and contact information.
    NOTICE
    There is no built in microphone in the display. Phone call audio will play through the phone speakers or Polaris approved headset if connected. Some dial options may be unavailable at speeds greater than 3 MPH.

Connecting your Bluetooth® Headset with the Display

The display can connect with Polaris approved Bluetooth® headsets to listen to music, take phone calls, and talk with other riders.

To connect your Bluetooth® heaset to your display, do the following:

  1. From the Device Manager menu press “Add Device.”

  2. Turn your Bluetooth® headset on and put it in phone pairing mode.

  3. When your Bluetooth® headset appears on the display press the “+” icon on the display. Once your headphones are connected you will see the headset icon in the upper left-hand corner of the display screen.