en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Group Ride Setup

There are two ways to set up a group ride.

Mobile Phone Group Ride:

  • Works within cellular range

  • Requires a tethered mobile phone

  • Infinite range between vehicles

  • Works with friends using the mobile app

Vehicle-to-vehicle Group Ride:

  • Works anywhere, no phone required

  • Requires an installed V2V antenna, standard on MY20+ vehicles

  • 1+ miles range between vehicles

Mobile Phone Group Ride

To set up a group ride using a mobile phone, do the following:

  1. From the map menu, tap the Group Ride button.

  2. Tap the Setup Mobile Phone Group Ride button on the display screen.

  3. Complete all three steps on the screen, in the specified order, to set up group ride.

  • Enable your Bluetooth® tethering in your phone's settings. Tap instruction for more information of how to enable tethering on an iPhone or Android phone.

  • Connect your phone via Bluetooth®. If you phone is currently connected you MUST disconnect and reconnect it.

  • Press the login button to login to your Ride Command account. If you do not have a ride command account, sign up at ridecommand.polaris.com

NOTE
Once you've completed all three steps above, your information will be stored (unless cleared manually) and you will not need to login again into your Ride Command account for future group rides.

  1. Press the back button to go back to the group ride screen and join your Group Ride.

NOTE
In order for vehicles with a V2V antenna and vehicles using mobile phone based group ride to join the same group, at least one member of the group must be connected to both the V2V antenna and the mobile phone based group ride.

Vehicle to Vehicle (V2V) Antenna

If your vehicle is equipped with a V2V antenna, use the following procedure to setup Group Ride:

  1. From the map menu, tap the Group Ride button.

  2. Tap Setup V2V Group Ride button on the display screen.

  3. Tap the Antenna Installed toggle switch to the Yes position.

You are now able to join a group ride with other riders who have a V2V antenna installed. Press the back button to go back to the group ride screen and join your Group Ride. If you would like to ride with friends who do not have a V2V antenna, complete the setup instructions below to set up a mobile phone group ride.

Parent topic: Group Ride